Voici ci-dessous les différents paramètres ou attributs disponible sur les unités ENT, suivant qu'il s'agit d'une carte virtuelle, SEA, Physique ou Etherchannel.
accounting disabled Enable per-client accounting of network statistics True
ctl_chan ent23 Control Channel adapter for SEA failover True
gvrp no Enable GARP VLAN Registration Protocol (GVRP) True
ha_mode auto High Availability Mode True
hash_algo 0 Hash algorithm used to select a SEA thread True
jumbo_frames no Enable Gigabit Ethernet Jumbo Frames True
large_receive no Enable receive TCP segment aggregation True
largesend 0 Enable Hardware Transmit TCP Resegmentation True
lldpsvc no Enable IEEE 802.1qbg services True
netaddr 0 Address to ping True
nthreads 7 Number of SEA threads in Thread mode True
pvid 4023 PVID to use for the SEA device True
pvid_adapter ent18 Default virtual adapter to use for non-VLAN-tagged packets True
qos_mode disabled N/A True
queue_size 8192 Queue size for a SEA thread True
real_adapter ent45 Physical adapter associated with the SEA True
thread 1 Thread mode enabled (1) or disabled (0) True
virt_adapters ent18,ent19 List of virtual adapters associated with the SEA (comma separated) True
# CARTE VIRTUELLE
# lsattr -El ent18
alt_addr 0x000000000000 Alternate Ethernet Address True
chksum_offload yes Checksum Offload Enable True
copy_buffs 32 Transmit Copy Buffers True
copy_bytes 65536 Transmit Copy Buffer Size True
desired_mapmem 0 I/O memory entitlement reserved for device False
max_buf_huge 64 Maximum Huge Buffers True
max_buf_large 64 Maximum Large Buffers True
max_buf_medium 256 Maximum Medium Buffers True
max_buf_small 2048 Maximum Small Buffers True
max_buf_tiny 2048 Maximum Tiny Buffers True
min_buf_huge 24 Minimum Huge Buffers True
min_buf_large 24 Minimum Large Buffers True
min_buf_medium 128 Minimum Medium Buffers True
min_buf_small 512 Minimum Small Buffers True
min_buf_tiny 512 Minimum Tiny Buffers True
trace_debug no Trace Debug Enable True
use_alt_addr no Enable Alternate Ethernet Address True
# Carte ETHERCHANNEL
# lsattr -El ent45
adapter_names ent10,ent2 EtherChannel Adapters True
alt_addr 0x000000000000 Alternate EtherChannel Address True
auto_recovery yes Enable automatic recovery after failover True
backup_adapter NONE Adapter used when whole channel fails True
hash_mode src_dst_port Determines how outgoing adapter is chosen True
interval long Determines interval value for IEEE 802.3ad mode True
mode 8023ad EtherChannel mode of operation True
netaddr 0 Address to ping True
noloss_failover yes Enable lossless failover after ping failure True
num_retries 3 Times to retry ping before failing True
retry_time 1 Wait time (in seconds) between pings True
use_alt_addr no Enable Alternate EtherChannel Address True
alt_addr 0x000000000000 Alternate ethernet address True
busintr 86946 Bus interrupt level False
busmem 0xffca0000 Bus memory address False
chksum_offload yes Enable hardware transmit and receive checksum True
delay_open no Enable delay of open until link state is known True
flow_ctrl yes Enable Transmit and Receive Flow Control True
intr_priority 3 Interrupt priority False
ipv6_offload yes Enable large send and checksum offload for IPv6 packets True
jumbo_frames no Transmit jumbo frames True
large_receive yes Enable receive TCP segment aggregation True
large_send yes Enable hardware transmit TCP resegmentation True
media_speed Auto_Negotiation Media speed True
receive_proc 16 RX packets processed before PIO to adapter True
rx_bds_done 5 RX packets before RX interrupt True
rx_coalesce 16 Receive packet coalesce count True
rx_hog 1000 RX buffers processed per RX interrupt True
rx_ticks_done 50 Clock ticks before RX interrupt True
rxdesc_que_sz 1024 RX descriptor queue size True
slih_hog 10 Max Interrupt events processed per interrupt True
tx_bds_done 0 TX buffers used before TX done interrupt True
tx_que_sz 8192 Software transmit queue size True
tx_ticks_done 1023 Clock ticks before TX interrupt True
txdesc_que_sz 512 TX descriptor queue size True
use_alt_addr no Enable alternate ethernet address True
